XBD Electric Motor Driven Fire Pump Specification
 |
Centrifugal Pump: |
| These Centrifugal Pumps are specially designed for | |
| fire-fighting purposes. | |
| *Pump Type | |
| □-Horizontal End Suction Type | |
| □-Horizontal Split Case Type | |
| □-Horizontal Multistage Type | |
 |
□-Vertical Multistage Type |
| *Max. Capacity: 400L/S (6300 US.GPM) | |
| *Max. Head: 250mt. (355 psi) | |
| *Work Pressure: 1.6 Mpa (4.0 Mpa on request) | |
| *Materials: | |
| Casing in Cast Iron; Impeller in Cast Iron(Bronze on request); | |
 |
Shaft in Alloy Steel(Stainless Steel on request); Shaft Sleeve |
| in Stainless Steel. | |
| *Shaft Seal: Adjustable Packing Gland or Mechanical Seal. | |
| Electric Motor: | |
| Totally enclosed, standard IEC-UNEL or NEMA , fan-cooled, protection | |
| IP54 (IP55 on request), insulation class F, 3-phase, 380V, | |
| 50 Hz Frequency, 2 or 4 poles. or 6KV and 10KV HV motor (Option). | |
 |
Controller: |
| Designed to provide completed Automatic; Manual operation | |
| of electric motor driven fire pump. | |
| Motor Starting types: | |
| □-Direct on line Type | |
| □-Star-Delta type | |
| □-Autotransformer Reduced Voltage Type | |
| □-Soft Starting Type | |
| *Contacts for remote alarm of: | |
| -Pump Running | |
| -Low Suction Pressure | |
| -Technical Inconveniences | |
| *Wall Mounting or Floor Mounting protection IP44. | |
| *Relay for Remote Start. | |
| *Assembled automatic transfer switch (on request). | |
| Accessories: | |
| *Coupling and Coupling Guard. | |
| *Suction and Discharge Gauges. | |
| *Automatic air release valve (Option). | |
| *Base Plate. | |
| *Anti vibration joints and dampers (on request). |